0.6 / 1kV Concentric Cable 2 3 4 Core 2 X 6 AWG IEC Standard For Transmission

0.6 / 1kV Concentric Cable 2 X 6 AWG IEC Standard for Transmission

Product Description:

These cover Type USE and USE-2 (below-ground) and Type SE () power cable for installation in accordance with Article 338 and other applicable parts of the National Electrical Code (NEC). These cables are for the service-entrance and other (NEC) uses described in 1.4 1.8. In a multiple-conductor cable that is other than submersible-pump cable and does not have a grounding conductor it is appropriate to have one circuit conductor without insulation. It is also appropriate for a pump cable to have a grounding conductor and for Type USE and USE-2 cables to have an insulated grounding conductor. Each insulated conductor in these cables is rated for 600V. Type USE cable has insulation, except for of HDPE-over-XLPE insulation used for single-conductor Type USE cable. Type USE cable has or insulation.

Type:

Single core type with less neutral entrance cable

Type 1: ASTM Standard Circular Type Concentric Cables

1. Conductor: Copper wire, Aluminum Wire, Aluminum Alloy Wire S8000, Copper Clad AluminumCCA)

2. Insulation: XLPE

3. Neutral Conductor: Copper wire, Aluminum Wire, Aluminum Alloy Wire S8000, Copper Clad AluminumCCA)

4. Binder Tape: Polyester Tape or Semi-conducting Tape

5. Outer Sheath: XLPE

Technical Particulars

Packing

These products are popular in With rich manufacturing experience, we would like to provide you them very much. Any demand can feel free to contact us. Welcome to visit our factory