1 core or 2cores Tinned Copper Core PV wire XLPO Jacket Black/ Red For Solar Power System

Application

Especially for the connection between Solar power generation device connector and connection of inverter, Under the condition of different climate outdoor installation, and can adapt to the dry and wet indoor working environment

Cable Structure

Conductor: Tinned Coppe, according to VDE 0295/IEC
60228, Class 5

Insulation: Electron-beam cross-linked Polyolefin
Copolymer TUV2PfG/1169

Sheath: Polyolefin Copolymer electron-beam cross-linked TUV2PfG/1169

Insulation/Sheath colour : black/black, black/blue, red/red, blue/black, black/red,red/black, blue/blue,yellow/green or based on your demand

Characteristic

High heat-resistant flame retardant
• halogen-free
• climate resistance
• minimum bending radius: Φ ≦ 12mm:3XD
Φ > 12mm:4XD
• halogen-free:
Not contain hydrochloric acid comply with EN50627-2-1
Not contain fluorinecomply with EN60684-2
• Flame retardant from extinguish compy with IEC60332-1-
2+EN60332-1-2

Future

Right now our solar cables are welcomed SUPER HOT at UK, Belgium, Germany, Huangrey, France, Australia, India etc.

Solar system industry is very hot recently and more in the future, now almost all the countries goverment are now encouraging and supporting this industry to reduce CO2 releasing.

Technical Parameter

Packing and shipping: Cable is supplied in wooden reels, corrugated boxes and coils. Cable ends are sealed with BOPP self adhesive tape and non-hygroscopic sealing caps to protect the cable ends from moisture. The required marking shall be printed with a weather-proof material on the outsides of drum according to customer's requirement.

We are capable of meeting the most strict delivery schedules according to per purchase order. Meeting the deadline is always the top priority as any delay in the delivery of cable can contribute to overall project delay and cost overrun.