Aluminium Steel Reinforced ACSR 0.6/1kv Aerial Bundle Conductor

Insulated XLPE ABC Aluminum Overhead Aerial Bundle Power Conductor Electrical Cable 0.6/1kv

Characteristics of Overhead Insulated Cable
1)Rated voltage U0/U :0.6/1 KV
2)Max. permissible long-time working temperature : PVC or PE insulated conductor is not more than 70 ,and that of XLPE insulation is not more than 90 .
3)Installing temperature should not be below -20 .
4)Admissible bending radius to cable :When overall-diameter (D) is less than 25 mm , it should be not less than 4D . When overall diamter(D) is 25mm or more , it should not be less than 6D .
Our overhead insulated cable have formed a system, such as single core, two-core ,three core and four core. There are conductors of aluminium , aluminium alloy or aluminium steel-reinforced . We can manufacture the overhead insulated cable not only in accordance with China`s standard GB12527-90 but also the other standards and special requiement by the custormers. If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.
(Service drop cable)
1. Stranded aluminium conduct
2. PE or XLPE insulation
3. ACSR, AAAC Messenger wire

Application
It is preferred to use of service drop (ABC cables) instead of uninsulated conductors at low voltage networks. service drop (ABC cables)are especially used at areas where the cost of underground networks is expensive and also for electrification of rural areas like villages.
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.

Triplex AAAC cable

Triplex ACSR cable

Duplex Service Drop