Power cable Electrical cable PVC Sheathed cable NYM-J 3×1,5 mm² 100% copper 100 meters

NYM,NYM-J,NYM-O,300/500V Solid Copper PVC Insulation PVC sheath Electrical Power Cable

The NYM cables comply with the construction product classification criteria according to the EU CPR Regulation 305/2011 and EN 50575, being those indicated for industrial use, household use and wiring. Made in accordance with VDE 0250-204 These cables can be used over and under plaster, masonry and concrete. The cables must not come in direct contact with concrete. Their use in open air is only possible as long as the cable is protected against direct sunlight. They can be used in dry, damp or wet environments.

Suitable for the following installations:

• Internal or receptive installations
• Internal installations for houses and premises
• Installations in premises with special characteristics
• Installations with special purposes: building work provisional and temporary installations
• Receiver installations
• Electrical installations on furniture

1. Conductor: Rigid electrolyte copper (Class I-II) in accordance with DIN VDE 0295, UNE-EN 60228, EN 60228 and IEC 60228
2. Insulation: PVC type TI-1 in accordance with DIN VDE 0281-1, UNE 21031-4 and HD 21.4S2:1990 and IEC227-4:1979 MOD
3. Filling: PVC
4. Sheath: PVC type TM-1 in accordance with DIN VDE 0281-1, UNE 21031-4 and HD 21.4S2:1990 and IEC227-4:1979 MOD
5. Nominal voltage: 300/500 V
6. Test voltage: 2.000 V A.C.
7. Maximum temperature: 70 ºC

Other characteristics:

Made in accordance with VDE 0250-204
Colours in accordance with DIN VDE 0293-308, UNE 21089 and HD 186S2
No flame propagation in accordance with VDE 0482-332-1-2, UNE-EN 60332-1, EN 60332-1 and IEC 60332
CPR classified according to EN 50575

NYM-J cables are made with a yellow/green conductor
NYM-O cables are made without yellow/green conductor

Nym-j cable and Nym-o Specification Sheet:

2. Company information